3 more videos!

[Diamondhunter]

Sorry for the amateur camera work and commentator!


http://www.youtube.com/user/SavanaEngin ... uHaVM1I1lc


http://www.youtube.com/user/SavanaEngin ... UAyo_47wMc


http://www.youtube.com/user/SavanaEngin ... j9k4fc3Exs

[golden optimist]

I like your videos. What I think a lot of us would like is a more detailed look at the components of the jigs and how they operate. I've seen larger ones but most people here on the forum have never seen them before.

Here's one I've visited.

jigplant.jpg (30.5 KiB) Viewed 2511 times

In operation, the roughing jig. The material slurry is fed into the middle.

jig1.jpg (43.14 KiB) Viewed 2511 times

Here the input is shut off so you can see the top of the jig.

jig2.jpg (70.05 KiB) Viewed 2511 times

The slots under the classification material. In this case, cassiterite, specific gravity around 7.

jig3.jpg (109 KiB) Viewed 2511 times

The diamond shaped items are the 2 finishing jigs.

finishjig.jpg (41.7 KiB) Viewed 2511 times

Here's a link to a cleanup video after about an 8 hour run with the plant. Most of you may have seen the video.
http://golddredgervideo.com/alaska2008/ ... cvideo.wmv

Leonard

[Diamondhunter]

Thats actually a really nice jig setup. I'm going to watch the clean-up the video now since I have never seen it. I will try and get some better shots of the components for you next week since we have a new build started for South Africa.

[golden optimist]

He was running about 175 yard an hour with his setup. There was 1 excavator operator fedding the trommel continuosly and the other pushed feed up to him and removed the waste from the output end of the trommel.
Leonard

[Hoser John]

Righteous idea on the columination in a circular pattern as each cell eliminates hi/low areas and homogenous application of motion quadrupples recoveries WOW-impressive to say the least-tons a au 2 u 2-John